Welcome

Latest FAQs

We regret to inform you that we cannot attend to incidents related to purchases made on the Amazon platform.

At Amazon, we are third-party suppliers and have no direct control over orders or deliveries. Amazon is the company that sells the product. Therefore, for any problem that arises with your purchase on Amazon, you should go directly to their customer service.

How to contact Amazon?

You can contact Amazon in the following ways:

What information should you have on hand?

To facilitate the resolution of your incident, we recommend that you have the following information at hand:

  • Order number
  • Purchase date
  • Product Description
  • Problem you have encountered
  • Any other relevant information

What to do if Amazon does not resolve your incident?

If Amazon does not resolve your incident, you can contact us directly and we will study your specific case. 

We ship all of our orders the day after they are received. If you have placed your order before 10:00 am, it is very likely that it will be shipped the same day.

Yes, you just have to select it in the shipping options.

Please note that orders may take a day to be ready.

We try to maintain a stable stock of all our products. Please note that the website will only allow you to order products that are available at that time.

If there is no stock available, you can set an alarm on the product page that will notify you when the product is back in stock.

If you urgently need to purchase a product that is not available, contact us and we will try to solve it.

Don't worry, we understand that these things can happen. The only thing we are going to ask of you is that the filament has not been opened. To manage a filament change due to diameter reasons, you can send us an email to info@3dfils.com or use the form contact.

Remember to have the order reference on hand to speed up the process.

As you all know in 3D printing objects are built layer by layer. This implies that each layer supports the next layer. This next layer may not coincide exactly with the previous one, which causes part of the layer to be exposed, that is, without being supported by the previous layer.

There is a point where this is not possible since the upper layers do not have enough support from the lower ones. This occurs when we exceed an angle of 45º. To solve this problem and for the piece to hold up during printing we need to use the support structures.

What are support structures in 3D printing?

The support structures are elements that are printed together with the model but that are not part of the original design and that serve to support the protruding parts of the models that exceed 45º.

Rule

These support structures can be made of the same material as the main piece or, if we have an extra extruder, of another material that is easier to remove.

The support structures are created from the same program with which we prepare the 3D printing and their correct configuration is crucial to obtain a good finish in the parts in which we use them.

The support problem with flexible materials

\r\n

When we use rigid materials such as PLA remove the support, although sometimes tedious, it is usually simple. With the appropriate tools we break the support structure and remove it. This is because support structures are often thin and brittle with rigid materials.

\"\"
Removing flexible supports

With flexible materials things change. Although the support structures remain thin, the very nature of the material means that it does not break. So the only way to remove the support material is by stretching or cutting in the worst cases.

What should be taken into account when configuring support for flexible materials?

There are two key aspects when setting it up: the support pattern and the gap between the support and the part.

As we have said before, the only way to remove the support in 3D printed parts with flexible filament is to stretch. This is why we must configure the support in a way that makes this task easier for us.

Speaking of thesupport pattern, it is best to reduce the contact points by trying to make the supported surface as large as possible. We have to avoid types of support in which the structure crosses each other, such as a support with a grid pattern. Our choice is always a support with a cross pattern since the area it supports is much larger but the contact points are always a single line.

To see this we are going to compare the single line pattern with the cross pattern.

\"\ "

As you can see for the same area, the cross pattern supports more areas than the others with the advantage that it always maintains the minimum contact surface, not like the grid support that when intersecting creates areas where removing the support is going to be more difficult for us.

The other fundamental parameter is the separation between the piece and the support. If we leave it too close together, the support will fuse with the piece, making its removal impossible. If we separate it too much it will not be able to withstand the layers of 3D printing, resulting in a disaster.

Recommended parameters to generate support with eFil

Taking into accountAll of the above, the parameters we recommend for the eFil range of flexible filaments are:

Cantilever angle 45º
Density 25%
Support pattern Cross
Z distance on the support 0.19mm
X/Y distance on the support 0.7mm
Priority in support distances Z over X/Y

Payment methods available in Spain
Bank transfer
You can conveniently transfer the amount of your purchase to our account. As soon as payment is made, your order will be shipped (It may take 4 to 5 business days).
Credit card
Pay easily with one of these credit cards: VISA, Mastercard, American Express, Diners Club, JCB.
Credit card
Pay easily and securely with your Maestro bank card for fast processing of your online purchases.
Paypal
Pay securely through Paypal account.

If you need to contact us, you can do so in the following ways:

Remember that our customer service hours are from 10:00 to 16:00

If you buy from a European company with a valid VAT number you can get your invoice tax free. To do this, enter your VAT number in the corresponding box in the selection process. If the number is valid, once entered the taxes will automatically disappear.

How can I distribute 3DFILS filament?

We are always delighted to welcome new distributors into the 3DFils family. Whether you are a large or small company, we always seek to offer the best conditions so that we can forge a beneficial relationship for all.

If you are interested in distributing the brand, you can contact us through the contact form or by sending an email to info@3dfils.com

Does this answer your question?
Yes
No
Sorry about that
How can we improve it?
Submit
Thanks
Your feedback helps improve this answer for everyone.
Close
Click for more products.
No products were found.

Menu

Settings

Share